The bent PSAG reinforcement coupler consists of reinforcement steel bent with a sleeve pressed on one end. The PSAG coupler generally has bend diameter DB= 10 x d, but on request it can be manufactured at DB= 15 x d or DB= 20 x d. Other lengths L1 and L2 are also available on request: PSAG d x Length L1x L2 in mm. When choosing dimensions L1 and L2 the minimum size according to the table below should be taken into account. L1 is the length measured from the front of the coupler to the back of the reinforcing bar.
| Description | Product no. |
|---|---|
| PSAGGD 10-M12-L on request | 1045 |
| PSAGGD 12-M16-L on request | 1046 |
| PSAGGD 16-M20-L on request | 1047 |
| PSAGGD 20-M24-L on request | 1048 |
| PSAGGD 25-M30-L on request | 1049 |
| PSAGGD 32-M42-L on request | 1050 |
| PSAGGD 40-M48-L on request | 1051 |
| Qty. | |
|---|---|
