TBL

The threaded lifting loop (TBL) is made of high-grade steel wire rope according EN 12385-4, swaged in a steel ferrule made of steel S355JR. A label marked with the admissible load and the code number of the testing is attached to each bended lifting loop. Before use, check that the wires are in good condition. Do not use if the wire cable is bent, crushed or kinked or if there is any loosening of the outer layer. Discard if the wire is corroded according EN 13414-1.

Avoid bending the steel wire rope while the precast unit is in storage. Exposed loops can be attached to standard crane hooks, but the curvature radius of the crane hook should at least be equal to the diameter of the wire rope. It is essential to check that the wire rope is in good condition, with no broken, crushed or unravelled wire. Bended Lifting Loops with any signs of damage should not be used.

These lifting systems are suitable for use through a single cycle from production to final installation. They are not suitable for multiple use applications!